|
M0930-03-20
|
Optimization of Roller Compaction Process Parameters for a Poorly Soluble Drug Using Quality by Design Tool
|
|
M0930-08-51
|
Peak Shear and the Effect of Kneading Block Geometries on Twin Screw Granulation Process Design
|
|
M0930-08-53
|
Advancements in Mini-Tablets: High Drug Loading and Precise Dose Titration
|
|
M0930-11-71
|
Characterization of Compression Behavior of Co-processed Excipient for Production of Orally Dispersible Tablets and of Their Blends with Active Ingredient
|
|
M1030-03-18
|
Formulation of Omeprazole Minitablets with Delayed Release: A Seal and Enteric Polymer Coating Approach
|
|
M1030-12-81
|
Development of a Platform Coating Approach to Taste Masking Bitter Drugs in Micro-tablets for Pediatric Patients
|
|
M1130-08-51
|
Comparative Study of Suitability for Wet Continuous Production Process Using MCC with Different Characteristics
|
|
M1130-11-70
|
A DoE Approach to Study the Influence of TSWG Process Parameters on the Characteristics of Granules and Tablets
|
|
M1230-02-14
|
The Influence of Coating Parameters on Transparency of Semi-permeable Membrane Coating of Push-Pull Osmotic Pump Tablets
|
|
M1230-03-17
|
Strategies for Producing Clinical and Commercial RNA-LNP Drug Products
|
|
M1230-03-19
|
Preparation of Osmotic Tablets Using a Direct-to-Hopper Formulated Push Layer Based on Polyethylene Oxide
|
|
M1230-03-20
|
Drug Product Attributes as an Effect of Formulation Composition of Vardenafil HCl Tablets Produced by the Mixture of the Coprocessed Excipient versus a Similar Spray-Dried Lactose Blend
|
|
M1230-05-30
|
Application of Quantitative Models to Systematically Evaluate Factors Impacting Swallowability of Tablets
|
|
M1230-12-82
|
Impact of Extra Components Added to an All-in-One Coprocessed Excipient to Obtain a Better Processability of Cohesive and Poor Flowing Hydrochlorothiazide
|
|
M1330-02-08
|
A Single-Step Extrusion Process for Formulation Development of Self-Emulsifying Granules for Oral Delivery of a BCS Class IV Drug
|
|
M1330-09-58
|
Impact of Alternative Lubricants on Tablet Parameters Approaching the Over-Lubrication Problems in Continuous Direct Compression Processes
|
|
M1330-12-82
|
Unlocking the Potential of Co-processed Excipient and algorithm-based tool for Direct Compression Tablet Manufacturing
|
|
M1430-03-20
|
Mini Tablets as a Compliant and Flexible Pediatrics Delivery System
|
|
M1430-08-53
|
Process Analytical Technology for Inline Aerodynamic Particle Size Measurements during Spray Drying
|
|
M1430-08-54
|
Analysis of Manufacturing Deficiencies for Immediate Release Tablets in Abbreviated New Drug Applications
|
|
M1530-09-56
|
Navigating Thermal Binder Selection for Rational Design of a Twin-Screw Melt Granulation Process
|
|
M1530-09-61
|
Trust the Process Analytical Technology: Lessons Learned from Allylzinc Bromide in the Pilot Plant
|
|
M1530-12-80
|
A New and Sustainable Twin Screw Wet Granulation Method Making Subsequent Drying Obsolete
|
|
T0930-02-11
|
Formulation and Process Variables that Affect Tableting of Carbamazepine Dihydrate
|
|
T0930-09-62
|
An Improved Spray Dried Dispersion Model: Integrating Machine Learning to Predict Optimized Process Parameters
|
|
T1030-09-58
|
Comparing the Performance of Wet and Dry Polymer Binders in High Shear Wet Granulation and Twin-Screw Granulation Processes
|
|
T1030-11-70
|
Amorphous Solid Dispersions of Cinnarizine – The Influence of Polymer Type and Manufacturing Method on Drug Solubility, Partition Coefficient and Stability
|
|
T1130-08-51
|
Multivariate Analysis of Granule Size Data from Continuous Granulation Screening and Response Surface Studies: A Tool for Process Understanding
|
|
T1130-08-52
|
Effect of Packing Fraction on Permeability of Powders for Pharmaceutical Processes
|
|
T1130-09-58
|
Investigation of Formulation of Mini-tablets with Direct Compressible Excipients
|
|
T1130-12-82
|
Quality by Design (QbD) Based Formulation and Process Optimization for a Direct Blend Process: A Risk Based Industrial Approach
|
|
T1230-02-11
|
Formulation Development and In-Use Sprinkle-on-the-Food Stability of Delayed-Release Pellets in Capsules: A Case Study
|
|
T1230-03-17
|
FDM 3D Printing Tablets Containing Iron Oxide Nanoparticles to Treat Iron Deficiency
|
|
T1230-03-18
|
Application of Hot Melt Extrusion Technology for the Preparation of Carbamazepine Extended-Release Tablets
|
|
T1230-08-50
|
Strength Evaluation of Pharmaceuticals and PTP Packaging
|
|
T1230-09-59
|
A Continuous Twin Screw Melt Granulation Process for High Drug Loading Oral Dosage Formulation
|
|
T1230-09-61
|
Optimization of the Continuous Direct Compression Process with Special Focus on Filling Devices
|
|
T1330-01-04
|
Demonstrating the Utility of a New High Molecular Weight HPC to Make Smaller Modified Release Tablets
|
|
T1330-02-10
|
Evaluating the Impact of an Ultra-High Solids Film Coating System on Process Times and Tablet Aesthetics
|
|
T1330-08-52
|
Development of a Discrete Element Method (DEM) Model to Study the Impact of Process Parameters and Material Attributes on Continuous Twin Screw Wet Granulation Process
|
|
T1330-08-53
|
Personalized Orodispersible Films Using Extrusion 3D-Printing: An Impending Shift in Pharmaceutical Manufacturing
|
|
T1330-09-62
|
Mechanistic Determination of Tensile Strength of Shaped Tablets
|
|
T1430-08-50
|
Analytical Case Studies for Processed-Induced and API-Related Nitrosamines in Finished Drug Products
|
|
T1430-09-57
|
Driving Timely Clinical Development: Simulation-Based Process Development and Tech-Transfer for Mini-Tablets in Capsules
|
|
T1430-09-59
|
Regulatory Experience with Continuous Manufacturing and Real Time Release Testing for Dissolution in New Drug Applications
|
|
T1430-11-72
|
Evaluation of Stability and Physical Parameters of Sitagliptin IR Tablets Coated with Different Titanium Dioxide Free Coating Systems
|
|
T1530-02-08
|
BIONDDTM Oral Capsule Delivery of Liraglutide with Bioavailability Comparable to Subcutaneous Injection and Development of Efficient In Vivo Model in Dogs to Test Feasibility of Other Biologic Drugs
|
|
T1530-08-52
|
Continuous Manufacturing of Solvent-Free Cyclodextrin Inclusion Complexes for Enhanced Drug Solubility via Hot-Melt Extrusion: A Quality by Design Approach
|
|
T1530-08-55
|
Investigation Study of Color Change in Drug Tablets by Raman Spectroscopy
|
|
T1530-09-57
|
An Automated Process Analytical Interface to Estimate Tablet Porosity and Height Based on Terahertz Time-Domain Spectroscopy Reflection Measurements
|
|
T1530-09-59
|
Development of the Quantitative Prediction Model by Applying Chemometric and Artificial Intelligence in the Near-Infrared Spectrum as Pharmaceutical Process Analytical Technology
|
|
W0930-02-11
|
Influence of Coating Parameters on Uniformity and Yield of Immediate Release Coating Formulation of a Low Dose Drug (Linagliptin) onto Metformin HCl ER Tablets - Fixed Dose Combination
|
|
W0930-02-12
|
Orodispersible Minitablets with Taste-Masked Spray-Dried Dispersions: Tablet Compression and Electronic Tongue Assessment
|
|
W0930-03-15
|
Oral Delivery of Probiotics Using Delayed-Release Capsules: Formulation and Dosage Form Considerations
|
|
W0930-05-29
|
Contribution of High-Speed In-Line Inspection to Automated and DoE-Based Development of Tablets
|
|
W0930-08-50
|
Impact of Hot Melt Extrusion Processing on Amorphous Solid Dispersion Bulk Powder Properties
|
|
W0930-08-55
|
Distributed Manufacturing of 3D Printed Pharmaceuticals: A Case Study
|
|
W0930-09-58
|
Continuous wet granulation and drying: moving from technical feasibility to commercial scale
|
|
W0930-11-73
|
Oral Tablets Containing a Model Protein API – Impacts of Excipient Selection, API Loading, Unit Operation, and Manufacturing Process Parameters on Tablet Properties, Performance, and Stability
|
|
W0930-12-78
|
Process Induced Degradation of Carbamazepine during Hot Melt Extrusion
|
|
W1030-05-32
|
Use of DEM to Troubleshoot Aesthetic Defects in Pharmaceutical Tablets
|
|
W1030-09-59
|
A Novel High Speed NIR Sensor as a PAT Tool for Monitoring of the Tableting Process: Determination of the Effective Sampling Depth
|
|
W1030-11-71
|
Development of Tablets with Biologics: Effect of Freeze-Dried and Spray-Dried Powders on the Compaction Behavior
|
|
W1130-02-08
|
Colestipol Hydrochloride Tablets: Challenges of Formulating a Complex Active Pharmaceutical Ingredient and Product Quality Considerations
|
|
W1130-03-20
|
Additive Manufacturing via Laser Sintering: Assessing the Influence of Parameter Selection on Printing Performance
|
|
W1130-03-21
|
Perforated Pan Coating of Directly Compressed Minitablets with the Use of Multi-tip Tooling to Facilitate Multi-particulate Drug Delivery: Challenges and Outcomes
|
|
W1130-08-49
|
In Line Particle Size Detection in Roll Compaction
|
|
W1130-09-61
|
Low Dose Formulations in Continuous Manufacturing of Tablets via Semi-continuous Feeding and Blending
|
|
W1230-11-70
|
Characterization of a New Multifunctional Disintegrant for Continuous Manufacturing
|